Click this button when your initial swatch has patches that bleed. It is recommended that you not expose your color device to non-cured ink.

 

Ink Percent for combination patches – This option adjusts the ink patches at the end of the Ink Restriction Swatch. It is recommended that you only change this setting if these patched are bleeding.

Swatch Bleed Control - The [Swatch Bleed Control] setting gives you the ability to substitute the bleeding patches by repeating the last adjacent patch that did not bleed (E. g. If the last three patches bleed and you set the number of patches to clip at three. The adjacent (or fourth to last) patch will simply be repeated. The software will then clip the readings from the repeated patches). You may do this for all channels, or select [Set Individual Channels]. [Swatch Bleed Control] can be configured to set all channels to one value or set per channel.

Variable DotA single element in the halftone printing process. In traditional halftone generation, dots vary in size to control the intensity of the printed color. In digital printing, the dot size is fixed by the print mechanism. Setup opens “Variable Dot Curve” dialog (Figure 2) providing control over total coverage, rate of coverage, and drop by drop transition (drop ratios)

 

Percent - This option is the amount of coverage from 0% ink to 100% ink. (Left to Right)

 

Target Percent - This option is the amount of placement (coverage) from 0% to 100%. (Up, Down)

 

Edit - Click this pull down menu to select the coverage, or transition curve for each channel.

 

Coverage - This curve represents overall rate and total dot placement for the selected channel.

 

Transition[s] - This represents overall rate and volume of dot size to dot size transitions (E. g. Transition 1 - Small dot to Medium dot, Transition 2- Medium dot to Large dot)

 

Copy - This option allows you to configure one channel and copy the curve to one or more other channels.

 

Input - This option is the “Percentage". (Left to Right)

 

Output - This option is the “Target Percentage". (Up, Down)

 

Import - This button allows you to import [ “.vds (VadDot Settings)] file.

 

Export - This button allows you to export [ “.vds (VadDot Settings)] file.

 

Amount - This option is percent of dots used.

 

Dot Size - This option represents which dot sizes are used.

Page Size - Select the page size that you want to print the swatch with.

Copies - Set the number of copies.

Orientation - Select [Landscape] or [Portrait]. [Landscape] is generally used because it reduces media waste.

Print Reflected - Select the [Print Reflected] check-box to print a mirror-image of the swatch. This option is useful when printing on backlit or transparency media.

Print Label - Select the [Print Label] check-box to print a text label after the image. You may wish to use this option to record what settings the swatch was printed with.

OutputOutput is the physical image produced by your printer. Output quality mainly depends upon the color (accurate, reproducible, pleasing), and clarity (resolution, dot placement, etc.) of the print on the desired medium (e.g. glossy photo, film, canvas). - Choose the type of output you want printed.

• ColorThe attribute of visual experience that can be described using the dimensions of Hue, Saturation, and Brightness. - This option will print your image with the color setup defined the media.
• Separations - Select [Separations] if you want a different image printed for each color channel.

 

Click [Print] to print the swatch, or [Cancel] to close this dialog without printing.